Sony. Make.Believe

Mono Subwoofer Amplifier

XM-ZZR3301

The XM-ZZR3301 amplifier affords incredible installation flexibility and packs quite a punch. ZR amplifiers offer tremendous value including convenience features such as: modern cosmetics, variable cross-overs, multiple channel configurations and singe-side electrical connections to suit almost any application.

Features Specifications

330W RMS (20Hz-200Hz 1.0% THD+N, at 4 Ohms, 14.4V)1

This unit has a maximum output power of 600W per channel at 4 Ohm.

600W RMS (50Hz 1.0% THD+N, at 2 Ohms, 14.4V)

This unit has a maximum output power of 1100W per channel at 2 Ohm.

High Level Input with Sensing Power On

Direct connection (High Level Input)can be made with the speaker output of your car audio unit if it is not equipped with RCA line output. High Level Sensing power on feature allows the unit to be activated without the need for remote connection.

Variable 6-70Hz sub-sonic HPF (High Pass Filter) 12dB/Oct.

Subsonic Filter

Subsonic Filter Built in variable 12 dB/Oct LPF (Low Pass Filter) from 50-300Hz enables users to concentrate the power on lower frequencies.

Bass Boost

Variable 0-10 dB 40Hz bass boost provides additional bass response at lower frequencies (rear channels only).

Audio Features
  • Level Control
  • High Level Input: 6.0 - 16V
Audio
  • Frequency Response
  • Input Level
  • Impedance
  • Noise Level
  • Signal Circuitry
  • Harmonic Distortion
  • Low Boost
  • Circuit System
  • Power Supply
  • Band
  • 10-300kHz (+/-0dB)
  • 0.3-6.0V (RCA pin jacks)
    6.5-16.0V (High Level input)
  • 2-8 Ohms
    4-8 Ohms Mono
  • 65 dBA
  • 6-70Hz Variable -12 dB/Octave Subsonic filter
  • 0.01% or less (50Hz)
  • 0-10dB (40Hz)
  • Class D Technology
    Pulse Power Supply
  • Class D Technology
    Pulse Power Supply
  • Low Pass Filter: 50-300Hz, -12dB/Oct
Amplifier Section
  • Power Ad Hoc
  • Speaker Impedance
  • Max power output
  • 330W at 4 Ohm from 20Hz-200Hz with < 1% THD1
  • 2-8 Ohm stereo
    4-8 Ohms mono
  • 1100W max power
Speaker
  • Impedance
  • Speaker Terminal Type
  • 2-8 Ohms
  • Output
Power
  • Output Power
  • Current Drain
  • Rated Output
  • Power Requirements
  • Internal Power Supply
  • Input Voltage
  • Maximum Output: 600W (at 4 Ohms); 1100Wx1 (at 2 Ohms)
  • At rated output: 60A (at 2 Ohms) Remote Input: 1 mA
  • 330W RMS (20 Hz - 200 Hz, 1.0% THD + N, at 4 Ohms, 14.4V)1
    600W RMS (100 Hz, 1.0% THD + N, at 2 Ohms, 14.4V)
  • 12V DC Car Battery (Negative Ground)
  • Class D Technology
    Pulse Power Supply
  • 10.5-16V Power Supply Voltage
Inputs and Outputs
  • Input(s)
  • Line Level Input(s)
  • RCA Audio Input(s)
  • Output(s)
  • Audio In
  • Audio Out
  • RCA Pin Jacks and High Level Speaker Input Connector
  • RCA pin jacks
  • Pin Jacks: 0.3 - 6V
  • Speaker Terminals
  • RCA Pin Jacks, High Level input connector
  • Speaker Terminals
Dimensions
  • Weight
  • Measurements
  • Approx. 2.9kg (6lb 7oz) not included
  • 14 1/8 x 2 1/4 x 11"
    (357 x 55 x 277 mm)
Supplied Accessories
  • Supplied Accessories
  • Mounting Screws (4)
    High Level Input Cord
    Protection Cap
Get Adobe Flash player